25MP 10 FPS 10-bit CMOS GigE Teledyne Dalsa Genie Nano Camera

Model: XL-C5100 Color

Model: XL-M5100 Mono

Genie Nano XL-C5100 or XL-M5100 cameras using the OnSemi 25M CMOS Sensor.  The camera has an industry standard gigabit Ethernet technology (supporting GigE Vision 1.2 & most of 2.0) with the Teledyne DALSA Trigger-to-Image-Reliability framework for dependably capture and transfer images from the camera to the host PC. Genie Nano cameras include TurboDrive™ technology, delivering high speed data transfers exceeding the GigE limit. TurboDrive uses advanced data modeling to boost data transfers up to 2 or 3 times faster than standard GigE Vision speeds – with no loss of image quality. These frame rates are achieved using a proprietary, patent pending process that assembles data from the sensor to optimize throughput, simultaneously taking full advantage of both the sensor’s maximum frame rate and the camera’s maximum GigE data transfer speed (up to 115 Mbytes/s).

Genie Nano XL5100 25MP 10 FpS CMOS GigE Camera

• Optimized, rugged design with wider operating temperature
• OnSemi Pythoin 25M Advance CMOS Image Sensor with Global Electronic Shutter
• Higher frame rates with Teledyne DALSA GigE Vision TurboDrive Technology
• Visual camera multicolor status LED on camer back
• Multi-ROI support
• 2 (default models) general purpose opto-coupled inputs
• 2 (default models) general purpose opto-coupled outputs (user, counter, or timer driven for Strobe and Flash triggering)
• Counter, Timer, and Events available to support imaging applications
• Cycling mode supports multiple camera setup switching (including Multi-Exposure)
• Supports Image Time-Stamp based on IEEE1588-2008 (PTP: Precise Time Protocol) or an Internal Timer
• Programmable Look-Up-Table (LUT) available
• Multicast and Action Command supported
• Image metadata supported
• Supports Power Over Ethernet (PoE) or auxiliary power input
• Implements 32 MB of Flash Memory
• 2 User Settings sets to store and recall camera configurations
• Supports the Gigabit Ethernet PAUSE Frame feature
• GigE Vision 1.2 compliant
• Gigabit Ethernet (GigE) interconnection to a computer via standard CAT5e or CAT6 cables
• Gigabit Ethernet (GigE) transfer speed up to 115 MB/second
• Application development with the no-cost Sapera™ LT software libraries
• Native Teledyne DALSA Trigger-to-Image Reliability design framework

Resolution (MP)
Resolution (H x V)
Frame Rate
Line Rate (KHz) Not applicable.
Interface Gigabit Ethernet
Lens Mount F or M42
Optical Size APS
Pixel (u)
Pixel Data Format 8/10
Sensor Size
Sensor Type CMOS
color or mono