Teledyne Dalsa Genie Nano 4020 (SONY IMX-304 Sensor) CMOS GigE Camera (12 MP)

Teledyne Dalsa Genie Nano 4020 (SONY IMX-304 Sensor) CMOS GigE Camera (12 MP)

The Genie Nano-4020 uses the Sony IMX304 Monochrome and Color sensors with a resolution of 4112 x 3008. Teledyne DALSA's Burst Acquisition and TurboDrive feature allows for image capture rates of up to 20 fps in 12M pixels resolution while maintaining very good image quality.

The Genie Nano-4020 takes advantage of gigabit Ethernet technology, transmitting data over standard CAT-5e and CAT-6 cables to distances of up to 100 m. Like all Teledyne DALSA GigE cameras, the Genie Nano-4020 is based on AIA (Automated Imaging Association) GigE Vision Standard to directly link the camera to a PC. And all Genie Nano cameras are built with Teledyne DALSA's Trigger to Image Reliability framework, which controls and monitors the entire process from trigger through image capture and transfer to host memory and helps protect you from data loss.

TECHNICAL INFORMATION:

  • Uses standard PC Ethernet port & hardware
  • Supports cable lengths up to 100 m (CAT-5e or CAT-6)
  • Simplified set-up with field proven Sapera Essential software featuring CamExpert
  • Engineered to accommodate industrial environment with a ruggedized, screw mount, RJ-45 connector
Downloads:
Genie Nano 12MP GigE Camera

Teledyne Dalsa Genie Nano 4020 (SONY IMX-304 Sensor) CMOS GigE Camera (12 MP)

  • • Optimized, rugged design with wider operating temperature
  • • Sony IMX304 Advance CMOS Image Sensor with high dynamic range
  • • Higher frame rates with Teledyne DALSA GigE Vision TurboDrive Technology
  • • Visual camera multicolor status LED on camer back
  • • Multi-ROI support
  • • 2 (default models) general purpose opto-coupled inputs
  • • 2 (default models) general purpose opto-coupled outputs (user, counter, or timer driven for Strobe and Flash triggering)
  • • Counter, Timer, and Events available to support imaging applications
  • • Cycling mode supports multiple camera setup switching (including Multi-Exposure)
  • • Supports Image Time-Stamp based on IEEE1588-2008 (PTP: Precise Time Protocol) or an Internal Timer
  • • Programmable Look-Up-Table (LUT) available
  • • Multicast and Action Command supported
  • • Image metadata supported
  • • Supports Power Over Ethernet (PoE) or auxiliary power input
  • • Implements 32 MB of Flash Memory
  • • 2 User Settings sets to store and recall camera configurations
  • • Supports the Gigabit Ethernet PAUSE Frame feature
  • • GigE Vision 1.2 compliant
  • • Gigabit Ethernet (GigE) interconnection to a computer via standard CAT5e or CAT6 cables
  • • Gigabit Ethernet (GigE) transfer speed up to 115 MB/second
  • • Application development with the no-cost Sapera™ LT software libraries
  • • Native Teledyne DALSA Trigger-to-Image Reliability design framework
Model: C4020 Color
Model: M4020 Mono
Series
Resolution (MP)
12
Resolution (H x V)
4096x3072
Frame Rate
20
Line Rate (KHz) Not applicable.
Interface Gigabit Ethernet
Lens Mount C
Optical Size 1.1
Pixel (u)
3.45
Pixel Data Format 8/12
Sensor
IMX-304
Sensor Size
17.58
Sensor Type CMOS
Spectral
color or mono