Back to Blog

LABVIEW VI APPLICATION EXAMPLE

Submitted by Abbie
11 Jan 2022
Image of Labview VI Example


The Grab (v2.1.0.2_171218), hereafter referred to as "Grab" LabVIEW software is an example program designed to demonstrate the various functions and operation of the Vieworks pixel shift cameras such as the VN-25MX-M72AO 25MP pixel shift coaxpress mono 72fps camera connected to a Euresys Quad G3 coaxpress board in a Win 10 computer running LabVIEW.  This software was developed using National Instruments LabVIEW 2015 and should run on LabVIEW 2015 or more recent.  The software is provided “as-is”. If there are questions or modifications that you feel are needed, please forward them to [email protected](link sends e-mail) and we will discuss with our developer the changes.  In order to use the larger array sizes as in Mono9Frame the 64 bit version of LabVIEW is necessary.  The (v2.1.0.2_171218) reference above is to indicate that the name of the software on disk is the word Grab followed by a (v2.1.0.2_171218).  For example, as of this writing the full name of the program is “Grab 171218.vi" as it was released on Dec. 18, 2017.  In addition to LabVIEW 2015 or better, the National Instruments Vision Acquisition toolkit must be installed as well as the directory containing the Grab program and all of the supporting Vis and SubVIs, and assorted files. The system this was built on was 64 bit Win7 on an Intel Core i7-6700 @ 3.4 GHz with 64GB of RAM.